Overview Search Up
Category: Scripts
Downloads: Page 1 of 2
 
Downloads: 53
[b]Logain Industries Freight Distribution Network (FDN)[/b]
Author Logain Ablar
Date Wednesday, 30 May 2012 16:55
File Size 121.42 KB
Download 4,657
Author Reflexer
Date Friday, 20 June 2014 09:03
File Size 10.99 KB
Download 460

Features

  • Forces a more reliable jump when shield drops below the Emergency Jump threshold set in the Command Console. 
  • Works on BigShips (M8, TM, and larger). 
  • Follows the settings in the Command Console. 
  • If the ship has a homebase or homesector set, then ship will jump to home rather than a random jump. 

(Thanks to swatti who pestered me about this until it was hard to ignore. ;) ) 

 Notes 

  • This script is not perfect. Jumping is never entirely reliable, although this script will give your ships a better chance to survive. 
  • Newly acquired ships do not automatically run Emergency Jump (not yet -- I may add that feature in the future). Save and reload to activate new ships. 
  • To set a homebase for a capital ship: Assign the ship to a wing, set a homebase for the wing, then remove the ship from the wing. The homebase will remain. 
Author DrBullwinkle
{author_url_text}
Date Thursday, 06 June 2013 12:27
File Size 32.85 KB
Download 949

A major improvement to the current Trade Command Software MK3. Result: More profit, less micro management!

Author gnasirator
{author_url_text}
Date Saturday, 17 March 2012 09:13
File Size 640.01 KB
Download 11,930
[b][u]Safe undocking / jumping[/u][/b]. . . Written for [b]AP[/b]. Not tested with [b]TC[/b].

Ever since Reunion came out, there have been certain ships that [b]would[/b] explode when the player [b]manually[/b] undocked them from certain stations.
This only got worse with TC and AP, since more and bigger ships and stations entered service.

I fixed it.


[u]What this script does:[/u]

If [b]the[/b] playership [b]manually[/b] undocks from anything or enters a new sector by any means, it's collision detection is disabled.

Collisions are reenabled if any of these conditions is true:
[list][*] autopilot is enabled
[*] ship's speed is reduced
[*] ship's course is changed (10° dead zone for the benefit of joystick users)
[*] ship is clear of [i]the[/i] closest ship, station, gate, [i]and[/i] asteroid.
(these 4 objects are searched for once, at the moment of launch)
[*] the player changes ships
[*] the player goes to a different sector or docks somewhere
[*] 60 seconds expire[/list]

There are no watcher scripts constantly running in the background.

Not only does this fix the typical issue of undocking a Khaak Corvette from a Kyoto or many stations, it also avoids other stupid situations.
If you emerge from a gate in a TM and immediately launch in a fighter, you are usually catapulted straight into the gate superstructure. This can no longer happen since gates are one of the 4 types of checked navigational hazards.
If you emerge from a gate and find yourself inside another ship, don't panic and don't touch anything. Strafe (that is not a course change) or accelerate away.


The inspiration for this script was [url=http://forum.egosoft.com/viewtopic.php?t=256572]this[/url]. I just didn't agree with the [i]way[/i] they did it. =P


[url=http://www.hentschke-keramik.de/x3scripts_tc.php3][img]http://www.egosoft.com/img/button_download.gif[/img][/url][url=http://www.hentschke-keramik.de/x3scripts_tc.php3]Download:[/url] ZIP

[size=16][u][b]Installation:[/b][/u][/size] extract the ZIP into the "X3 Terran Conflict" folder. The correct folder structure is already included.


[u][b]Resources used:[/b][/u] none
Author Gazz
{author_url_text}
Date Thursday, 14 June 2012 19:44
File Size 5.62 KB
Download 963
Author morbideth
Date Wednesday, 22 October 2014 12:57
File Size 13.2 KB
Download 477
zip60x0aHOT
Author eldyranx3
{author_url_text}
Date Wednesday, 15 October 2014 14:07
File Size 10.21 KB
Download 480
Author zanzal
{author_url_text}
Date Friday, 17 October 2014 18:46
File Size 130.02 KB
Download 817
Author Juggernaut93
Date Wednesday, 22 October 2014 11:22
File Size 44.99 KB
Download 450
Date Thursday, 06 June 2013 12:27
File Size 707 B
Download 529
Forces a more reliable jump when shield drops below the Emergency Jump threshold set in the Command Console.
Author DrBullwinkle
{author_url_text}
Date Thursday, 06 June 2013 12:27
File Size 44.42 KB
Download 987
Author Juggernaut93
Date Wednesday, 22 October 2014 11:10
File Size 24.02 KB
Download 599
A small script mod for the excellent Prospector from Lucike to implement the function Signal_Targeted (on TS class ships) used by gnasirator in its Explorer.

With this function the TS Prospector will flee from enemy when targeted before being attacked.

My deepest thanks to gnasirator for allowing the use of his scripts adapted for the occasion at Prospector and for the support provided.

Thanks also go to TECSG for his helpful advice.

The mod works with Lucike Prospector V. 3303.

The modified original files (I recommend saving them) are the txt file 8006 and the script
plugin.prospector.main.
Author Tiek
{author_url_text}
Date Monday, 07 May 2012 16:37
File Size 88.37 KB
Download 932
Author qwizzie
Date Wednesday, 15 October 2014 13:56
File Size 25.01 KB
Download 827
Author DrBullwinkle
{author_url_text}
Date Friday, 21 March 2014 21:49
File Size 298.05 KB
Download 703
Date Wednesday, 26 November 2014 17:56
File Size 4.49 KB
Download 1,046
This script adds a Replicator ware to a selection of docks. When equipped with replicators a ship can generate missiles, energy cells, ammo, drones and satellites over time.
Author Shimrod
{author_url_text}
Date Friday, 21 March 2014 22:29
File Size 45.87 KB
Download 1,623
Hephaistos Corp. reset script (for BP version 1.0)

The BP version 1.0 of the Hephaistos Corp. script has the problem that it freezes, if you select a sector as building location that has neither a jump beacon nor a jump gate in it. To reset a hanging script, do as follows:

I.) Download the archive 'HephCorp_BP_reset.zip' and extract its content ('plugin.X2I.HephCorp.reset.xml') to your 'X3 Terran Conflict/addon/scripts'-folder.

II.) Start the game and load your savegame.

III.) Open the Script Editor (instructions can be found here).
In the first window of the Script Editor select the 'Global Script Tasks'-entry, mark the script named "plugin.X2I.HephCorp.main3", press "Del" and confirm with "yes". That will abort the hanging script.
Afterwards go back to the initial Script Editor screen, but select the 'Script Editor'-entry now. This will bring up a list of available scripts. Look for the the script 'plugin.X2I.HephCorp.reset.xml' (the script list is sorted alphabetically) and mark it, press 'r' and two times 'Enter'. This will delete all Hephaistos Corp objects and reset all used variables. Note that you won't get any already paid money back this way.

IV.) Delete the file 'plugin.X2I.HephCorp.reset.xml' from your 'X3 Terran Conflict/addon/scripts'-folder.


©X2-Illuminatus - 17th September 2012




Author X2-Illuminatus
Date Monday, 17 September 2012 18:52
File Size 1.49 KB
Download 1,133
Defend the Universe against the Xenon
Author Marvelous3175
{author_url_text}
Date Monday, 27 February 2012 14:47
File Size 28.69 KB
Download 766
Author Alex2069/Amriel
{author_url_text}
Date Friday, 20 January 2012 23:41
File Size 152.88 KB
Download 5,416
Author Reflexer
{author_url_text}
Date Saturday, 01 August 2015 15:39
File Size 2.52 MB
Download 837
Author Anachron13
{author_url_text}
Date Thursday, 03 October 2013 14:48
File Size 72.43 KB
Download 1,808
Author Binesi
{author_url_text}
Date Friday, 17 October 2014 18:52
File Size 13.6 KB
Download 1,215
This script provides a missile safety so the warheads are armed [b]after[/b] the missile is at least 200m clear of your ship.
Author Gazz
{author_url_text}
Date Monday, 19 December 2011 23:48
File Size 100.2 KB
Download 753
This script allows equipment of ships almost automatically:
(Almost because of a few menus to configure equipment)

Even there are significant costs for equipment You might see this script as a cheat because there is no check of reputation or availability of goods at the equipment dock.

Screenshots can be found within the German discussion at: [url]http://forum.egosoft.com/viewtopic.php?t=316370[/url]


[b]What are the different scripts for?[/b]
[quote]1. Main-script "CS.LOOP.Schiffe.ausruesten"
Parameter: none

The script runs in an continuous loop and checks two conditions:
Are there more than 100.000 credits at player's account and is the player's ship docked at any station?
In this case You will get a list to select a ship waiting at an equipment dock to be equipped.
The script decides by name of ship whether a ship needs equipment or not (equipped ships carry a '°' in their names).
The selected ship will be equipped using the following scripts and all turrets will be set to 'missile defense' (!turret.missiledefense.std).

If no ship was selected the menu will not re-appear before the player docks at another station.[/quote]
[quote]2. The script for extensions "CS.SUB.Erweiterungen"
Parameter: The ship to be equipped

This script is called from the main script and equips the ship after showing a selection menu.[/quote]
[quote]3. The script for shields "CS.SUB.Schilde"
Parameter: The ship to be equipped

This script is called from the main script and equips the ship with the maximum installable shields.
Weaker shields are removed.[/quote]
[quote]4. The script for lasers "CS.SUB.Laser"
Parameter: The ship to be equipped

This script - the most complicate of all my scripts - is called from the main script and checks for a present configuration which will be shown to the player in order to decide whether to change it - or not.
Without changes the ship is automatically equipped with the pre-set lasers.
To change You'll be shown a menu with all turrets (only by numbers, no directions like 'front' or so) and lasers installed (or not).
For all changes are made within the ship (install and remove) changing of weapons directly will result in costs.
If possible all empty slots can be filled with ONE type.
The menu can only be left if there are no empty slots.
Configuration is stored in a global variable.
Unfortunately I found no way to write AND read configuration to/from a file...
Therefor with EVERY new game You will have to reconfigure.[/quote]

[b]How are costs calculated?[/b]
For every piece of equipment installed the MAXIMUM price is added to total.
For every piece of equipment removed the MINIMUM price is deducted from total.
As a result it can happen the total amount of a laser is 0 costing 100.000 Credits...

As additional charge 20% of the total amount - at least 1000 credits - are added.

If You are unable to pay all the price at once for each hour (in-game-time) there is an interest of 1% to the remaining amount.

As long the order isn't completely payed there no new orders can be given.

[b]How do I install the scripts?[/b]
UnZIP the file and put the scripts into TC's and/or AP's scripts-folder(s).
The language file(s) have to be located to the corresponding t-folder(s).

[b]How do I start the scripts?[/b]
On activation of the script-editor the script "setup.CS.Schiffsausruester" will ask You if the script shall be run - now, later or not.
Running later as [u]global script[/u] can be done by a "Re-Init Script Caches" or executing script "CS.LOOP.Schiffe.ausruesten".

[b]How to uninstall the scripts?[/b]
Normally I would say: delete them.
The script checks "Am I still here?" and ends itself if not. (I hope problems are avoided that way.)
[u]Version 5[/u] adds a check for the version of the script engine disabling the file-check for TC.
Therefore there's no warranty deleting of files will be enough or even damage Your savegame. (A hint from experienced scripters would be helpful here. Thanks.)

[b]Does the script run with TC?[/b]
[u]With Version 5[/u] it should run on TC (see above)

[b]Problems with other scripts?[/b]
Not tested.
But as the equipment is checked only by the name of a ship (with or without "°"), there might be problems with scripts or mods "messing around" with the ship-names.

[b]There was a message like "xxx destroyed". How do I restore my equipment?[/b]
Rename the ship by removing the "°". (e.g. make "Your Buster°" "Your Buster"again.)
And - of course - send the ship to an equipment dock.
Warning: If You changed the default armament the lasers will be equipped using the new configuration (additional costs).


[b]Have fun.[/b]

BTW: I'd be happy about ANY responses (Happy about ANY? Not really but... ;))

[b][u]Changelog:[/u][/b]
[u]v4.01:[/u] In v4 the laser slots where empty or the existent lasers were shown instead of the lasers to be installed when asking to use saved configuration. Fixed. 
Author chms
{author_url_text}
Date Saturday, 16 June 2012 17:25
File Size 45.48 KB
Download 1,461
Custom Start (AP Only)
Author Shimrod
{author_url_text}
Date Friday, 13 January 2012 22:13
File Size 70.26 KB
Download 7,103
Beacon Jump (AP)
Author Shimrod
{author_url_text}
Date Sunday, 12 February 2012 16:14
File Size 24.18 KB
Download 1,272
Author rusky
{author_url_text}
Date Friday, 03 October 2014 12:28
File Size 36.3 KB
Download 720
Date Friday, 27 February 2015 00:49
File Size 14.63 KB
Download 480
Author DrBullwinkle
Date Monday, 07 April 2014 01:32
File Size 64.78 KB
Download 16,558
This script is a temporary (*modified*) solution for the problem described in this egosoft.com forum topic.

The script a.destroy.ships will destroy all ships, which:

- are not player owned
- Job id is 0 (so they are not spawned by the Jobs-Engine)
- have a pilot (so they are not ownerless)
- that can be destroyed (so they are no important plot ships, those are normally invincible)
- run the two scripts !ship.cmd.killenemiesrange.std and !fight.attack.enenemiesrange.land


Installion and usage:
1. Download the script-archive and extract it to your X3AP-scripts-folder (default location is C:\Program Files\Steam\steamapps\common\X3 Terran Conflict\addon\scripts)
2. Start the game, load your save, activate and open the Script Editor.
3. Hightlight the script a.destroy.ships, press 'r' and two times 'Enter'.

The script will then destroy all the ships, which meet the criteria listed above. It will restart itself every three hours.

Uninstallation:
1. Open the Global script task window within the Script Editor 
2. Highlight the Script a.destroy.ships, press 'Del' and confirm with 'Yes'.
3. Delete the file a.destroy.ships.xml from your X3AP-"scripts"-folder.

Please note that this is neither an official fix nor do I suggest that you have to use it. But for those who play a *modified* game anyway or plan on doing so, it provides a possible temporary solution that is a bit more comfortable than looking for and destroying the offending ships manually. If your game is not *modified* yet and you plan on using this script, it is a good idea to backup your saves before.
Author X2-Illuminatus
Date Friday, 17 August 2012 09:44
File Size 2.54 KB
Download 725
This is a MOD for the Galaxy Explorer plugin and enables Explorers to spawn satellites instead of having to buy them.

Updated to work with Galaxy Explorers v1.9.8
Author gnasirator
Date Wednesday, 28 March 2012 09:15
File Size 7.22 KB
Download 3,065
Author Medevel
{author_url_text}
Date Tuesday, 27 December 2011 17:47
File Size 198.41 KB
Download 1,788
{author_url_text}
Date Saturday, 28 February 2015 07:07
File Size 25.93 KB
Download 1,077
See website
Author Marvelous3175
{author_url_text}
Date Saturday, 31 December 2011 00:02
File Size 66.1 KB
Download 2,056
Date Thursday, 26 February 2015 10:53
File Size 8.61 KB
Download 512
Author Reflexer
{author_url_text}
Date Friday, 20 June 2014 09:07
File Size 35.19 KB
Download 441
[b]Logain Industries Drone Defence Network (DDN)[/b]
Author Logain Abler
{author_url_text}
Date Monday, 09 July 2012 16:50
File Size 90.78 KB
Download 1,143

DCS2 is a complete production and equipping system for carrier-based fighters.

- More "Peace through superior firepower" by DrBullwinkle

Author DrBullwinkle
{author_url_text}
Date Saturday, 14 December 2013 15:41
File Size 168.37 KB
Download 5,559
X3AP 3.1 Plot Reset Script.
Author Keridos
{author_url_text}
Date Sunday, 01 June 2014 14:07
File Size 2.13 KB
Download 724
This script adds the command Special -> Explore Galaxy and a Config Menu under Additional Ship Commands.

Galaxy Explorers explore the universe, search for unknown sectors, scan for stations and asteroids and maintain a satellite network
Author gnasirator
Date Saturday, 17 March 2012 10:14
File Size 264.59 KB
Download 11,369
Artificial Life Plugin (ALP) Cleans up (removes) floating ware salvage and ejected astronauts.

Makes salvage game more challenging.
Date Tuesday, 10 December 2013 13:39
File Size 9.47 KB
Download 557
Smart Turrets (AP)
Author Shimrod
{author_url_text}
Date Sunday, 01 January 2012 00:20
File Size 308.3 KB
Download 8,488
Date Thursday, 06 June 2013 12:27
File Size 707 B
Download 504

This command allows you to transfer freight to and from a station or ship over large distances. Intergalactic Trade Software Standards now make it possible for the drones to trade with foreign stations.

Author DrBullwinkle, Tim-O
{author_url_text}
Date Saturday, 14 December 2013 11:42
File Size 79.16 KB
Download 1,163
Tired of RRF ships "poaching" your kills and interfering with your missions? Or wasting cpu by attacking other races, who don't really care? This package makes minor adjustments to RRF so that it will attack only player-owned assets.
Author DrBullwinkle
Date Monday, 24 June 2013 00:31
File Size 7.61 KB
Download 675

Energiegeneratorerweiterung 1.31[EGE] 

Die Energiegeneratorerweiterung ist eine terranische Entwicklung, welche erst kürzlich zum Verkauf an vertrauenswürdige Personen (ATF Systemzugang: Erde) freigegeben wurde. Deshalb ist sie auch nur am Torus erhältlich. 

 

Funktionen: 

A: Erzeugung von E-Zellen: 

Vom Schildgenerator kann die Energie umgeleitet werden um eine begrenzte Anzahl (abhängig von den eingebauten Schilden) von E-Zellen zu erzeugen. Da dadurch die Schildstärke sinkt, wird dieser Modus bei Feindkontakt automatisch unterbrochen. 

Diese Funktion ist nur auf großen Schiffen verfügbar (ein wenig mehr als 20% des Laderaumes wird mit ez gefüllt, 400MJ Schildstärke minimum). 

Auswahl: Erweiterte Schiffkommandos 

 

B: Schildbooster: 

Durch Umkehrung des o.a. Energiekreislaufs können die Schilde durch Verbrauch von E-Zellen schneller aufgeladen werden. 

Auswahl: Erweiterte Schiffkommandos für alle Schiffe und zusäzlich Hotkey für Spielerschiff 

 

C: Sprung zur Position: 

In Verbindung mit dem Sprungantrieb und Navigationssoftware Mk 1, ermöglicht EGE einen Sprung zu einer gewählten Position und ist somit nicht mehr an ein Tor gebunden. Gezielte Manipulation der Energiezufuhr kann den Warptunnel an einer beliebigen Stelle kollabieren lassen. Die mitgelieferte Software zur Berechnung des Austrittspunktes benötigt viel Rechenzeit um zu verhindern, dass das Schiff mit einem Hindernis am Austrittspunkt kollidiert. Daher ist eine Verkürzung der Sprungantriebsladung durch SINZA nicht möglich. 

Der Sprung innerhalb eines Sektors verbraucht pauschal 10 EZ 

 

Begleiter, welche mit EGE, Sprungantrieb, Navigationssoftware Mk1 und genügend E-Zellen ausgrüstet sind, nutzen den "Sprung zur Position" ebenfalls. Das Spielerschiff springt zuerst in den Sektor, die Beleiter folgen nach und gruppieren sich um das Spielerschiff. Begleiter welche die Sprungvorausstzungen nicht erfüllen bleiben im Ursprungssektor bzw. nutzen die konventionellen Methoden. 

(Ist dz. nicht mit großen Verbänden bzw. mit allen GKS getestet. Eventuell wären Anpassungen beim Mindestabstand nötig. Feedback diesbezüglich wäre hilfreich und erwünscht) 

Auwahl: Navigationsmenü 

 

Installation: 

Scriptdateien ins Scriptverzeichnis und t-Datei ins t-Verzeichnis kopieren. (unter "X3 Terran Conflictaddon") 

Achtung: Der Spielstand erhält ein **modified** !! 

Im Paket ist das Script !init.set.modified (mit freundlicher Genehmigung von Lucike) enthalten, welches das Spiel automatisch auf **modified** setzt. Der manuelle Start des Scriptdeditors ist daher nicht mehr notwendig. 

 

Deinstallation:

A: Altes Save vorhanden 

1. EGE Scripte löschen (!init.set.modified nicht vergessen!) 

2. Altes Save laden 

 

B: Kein altes Save vorhanden 

1. setup.ege.xml löschen 

2. Save laden und Player in das Schiff wo EGE installiert ist setzen 

3. uninstall.ege aufrufen 

4. Abspeichern und Scriptdateien löschen 

Achtung: Das **modified** bleibt bestehen. 

 

Ressourcen: 

t-File: 

8998-L049 

8998-L044 

 

Command-Slots:  

COMMAND_TYPE_NAV_30 

COMMAND_TYPE_SHIP_30 

COMMAND_TYPE_SHIP_31 

 

Ware: 

SS_WARE_SW_NEW_17 

 

Globale Variablen: 

ege.init 

shield.boost.hotkey 

 

Quellen: 

Die Grundidee der E-Zellen-Erzeugung und des Sprungs zur Position stammt aus dem „Exodus-Fleet“-Mod von Andras/Jakesnake5 

Die Grundidee des Schildboosters stammt von LV 

 

Author u24j7x5
{author_url_text}
Date Friday, 08 July 2016 10:29
File Size 69.49 KB
Download 421
This allows you to repair ships based on the amount of hull points that have been lost, rather than paying a percentage of the purchase price.
Date Friday, 12 August 2016 06:49
File Size 6.13 KB
Download 517
Includes fixes made by dblade (ship IDs are not shown), ShadowPhantom (show total number of matching ware that can be sold at a station instead of the station's current stock) and xfir01 (ship selection is now set to the ship from which the command is run instead of requiring manual ship selection).
Author alex2069
Date Sunday, 18 March 2018 18:56
File Size 70.33 KB
Download 1,613
Date Sunday, 10 March 2019 20:58
Language  English
File Size 31.56 KB
Download 411